Siemens HiPath 1100, Service Manual

Page: 351 / 389

Service Manual
7-351
Operation
HiPath 1100 applications
– If you are introducing the ADSL feature into the country or whenever there is a new
operator, there must be an ADSL release for the country. Send the configuration
to the manager of the local product (use the Default form).
The local manager must get in touch with/send this information to:
Mrs. Martha Unterstaller
martha.unterstaller@siemens.com
Hofmannstr. 51
Muenchen
GERMANY
81379
phone: +49 89 722 23090
Mrs. Unterstaller must contact: renato.collere@siemens.com, harold.erbesdobler
@siemens.com e sergio.gamo@siemens.com. They will take any necessary
steps.
3. The next official release of the ADSL (stored in the KMOSS) will include:
●
Countries, carriers and settings used (when the information is available);
●
At least one step-by-step example for configuring the ADSL tool, which is based on the
configuration information received;
●
Instructions concerning the correct sequence and names for introduction by country,
new carriers and field test (already mentioned in this document, Item 2);
●
If a country or operator is not included in the ADSL release, then the introduction is not
a version of Service/Support;
●
Support for ADSL of ESL 4.2, HiPath 1100 V5.0 or HiPath 1100 V5.1 does not
guarantee support for HiPath V5.2 or subsequent, except where indicated in the
documentation;
4. The next official release of software, hardware or applications for PABX that mentions
ADSL must make quite clear in the release documentation that:
The ADSL Feature is only released for the countries and carriers mentioned in the
corresponding official ADSL release documentation and those corresponding to the
version mentioned in the KMOSS.
Default form
ADSL settings
1. ADSL interface:
[ ] ADSL OVER POTS G992.1 B
[ ] ADSL OVER POTS G-Lite
Maximal Upstream rate: ______ kbps