Siemens Hicom cordless EM Operating Instructions Manual Download Page 25

Page: 25 / 68

Telephone functions

You have dialled a number, but the other party is busy or
does not answer: press the on-hook key. The last five
numbers dialled (up to 32 digits) are always stored auto-
matically.

Dialling a stored number

Press the display key -

the first

three stored numbers are displayed

If necessary, press the display keys
to scroll to the required number.

Press the talk key –

the selected

number is dialled

Copying a number to the telephone directory

Press the display key.
Scroll to the desired number.

Press the display key.
Scroll until

*2;.(!,

is displayed

and confirm.

Names

Enter names (max. 16 characters).
(see page 34).

Press the display key.
Confirm

?/!),2

),2-*,!

is displayed for approx. two seconds.

Number redial – last five numbers

*2;.(!,

?/!),2

),2

-*,!

Summary of Contents for Hicom cordless EM





































































Search results

Summary of Contents for Hicom cordless EM

Reviews:

Related manuals for Hicom cordless EM

Brands by name

Popular brands

Siemens Hicom cordless EM, Operating Instructions Manual

Search results

Summary of Contents for Hicom cordless EM

Reviews:

Related manuals for Hicom cordless EM

Brands by name

Popular brands