Siemens Hicom cordless EM Operating Instructions Manual Download Page 21

Page: 21 / 68

●

Off status: display clear – calls are not received!

●

On status: e.g.

is displayed – prerequisite for

all telephone functions, normal operating status!

Activating the mobile unit:

Press the On/Off key

– you hear the

confirmation beep.

Display when telephone is in the "on"
status, see page 11.

Deactivating the mobile unit:

Press the On/Off key until the display
is clear –

you hear the confirmation

beep

This allows you to protect your mobile unit against inad-
vertent key activation, e.g. when carrying it in your bag.
Calls are signalled even if the keypad is locked and can be
answered in the same way as when the telephone is on.

Prerequisite: Mobile unit is activated!

Activating the keypad lock:

Press the On/Off key for less than
1 second.

Display when keypad is locked.

Deactivating the keypad lock:

Press the On-Off key briefly.
Display when telephone is "on", see
page 11.

Activating/deactivating mobile units

Activating/deactivating the keypad lock

9!2

'*&!

Note:
The mobile unit switches off completely if you press the
On/Off key for too long.

Putting the mobile unit into service

Summary of Contents for Hicom cordless EM





































































Search results

Summary of Contents for Hicom cordless EM

Reviews:

Related manuals for Hicom cordless EM

Brands by name

Popular brands

Siemens Hicom cordless EM, Operating Instructions Manual

Search results

Summary of Contents for Hicom cordless EM

Reviews:

Related manuals for Hicom cordless EM

Brands by name

Popular brands