Siemens Hicom 300 H Operating Instructions Manual Download Page 108

Page: 108 / 167

Step by Step

Making multiline calls

108

Select and confirm.

Confirm.

You will find further HiPath 4000 features on

page 73.

Canceling the station fixed call forwarding
destination

Precondition:

The telephone is in the idle state. A fixed

forwarding destination has been saved (

page 107).

Press the line key for the required line.

Press the key. The lamp lights up.

for Hicom 300 E/H (not used in US)

Enter the service code.

Confirm.

Select and confirm.
If a fixed destination has been stored, it is displayed.

and

Select and confirm.

for HiPath 4000

The settings for station fixed forwarding for every line
are identical with the call forwarding function described
above. Therefore, for all further steps see

page 75.

Feature settings?

Call forwarding?

Activate?

Line

program/service

Destinations?

Fixed call forw.?

Delete?

Summary of Contents for Hicom 300 H








































































































































































Search results

Summary of Contents for Hicom 300 H

Reviews:

Related manuals for Hicom 300 H

Brands by name

Popular brands

Siemens Hicom 300 H, Operating Instructions Manual

Search results

Summary of Contents for Hicom 300 H

Reviews:

Related manuals for Hicom 300 H

Brands by name

Popular brands