Siemens Hicom 300 H Operating Instructions Manual Download Page 75

Page: 75 / 167

Forwarding calls

Step by Step

Select and confirm. Station fixed forwarding is deacti-
vated.

Output on first line.

If variable forwarding was previously programmed and
activated, it is deactivated and the forwarding destina-
tion is deleted.

Deactivating station fixed forwarding in the idle
menu

You can also deactivate station fixed forwarding in the
idle menu.

Select and confirm. Station fixed forwarding is deacti-
vated. The destination number is retained.

Activating and deactivating with call forwarding
key

Activating

Press the key. The lamp lights up.

Deactivating

Press the key. The lamp goes out.

Deleting the destination for station fixed forward-
ing

You can delete the destination for station fixed forward-
ing.

Press the key. The lamp lights up.

Confirm.

Confirm. Display shows "Station variable forwarding".

Confirm. Display shows "Station fixed forwarding" and
the forwarding destination.

Display "fixed forwarding target".

Select and confirm. The forwarding destination is delet-
ed. If Station fixed forwarding was activated it is now
switched off. If a forwarding key has been configured it
is deactivated.

Deactivate?

Fixed forwarding off

Call forwarding off?

Call forwarding

program/service

Destinations?

Call forwarding?

Next forwarding type? >

22805 Eric Brown

Delete?

Summary of Contents for Hicom 300 H








































































































































































Search results

Summary of Contents for Hicom 300 H

Reviews:

Related manuals for Hicom 300 H

Brands by name

Popular brands

Siemens Hicom 300 H, Operating Instructions Manual

Search results

Summary of Contents for Hicom 300 H

Reviews:

Related manuals for Hicom 300 H

Brands by name

Popular brands