18
Changing the basic settings
Prerequisite: The oven must be switched off.
1.
Press and hold the
±
button for approx. 4 seconds until
"Select language: English" appears.
2.
Use the
¾
or
¿
button to select the basic setting.
3.
Use the rotary selector to change the value.
4.
You can now make further changes to the basic settings To
do this, use the
¾
or
¿
button to change, and make settings
as described in points 2 and 3.
5.
Press and hold the
±
button until the display disappears. It
lasts approx. 4 seconds. All changes are saved.
Cancelling
Press the
‡
button. The changes are not applied.
Automatic switch-off
Your oven has an automatic switch-off function. It is activated if
no cooking time is set and the settings have not been changed
for a long time. The point at which this occurs depends on the
temperature or grill setting that has been set.
Switch-off activated
“Automatic switch-off" appears in the display. Operation is
interrupted. Press any button to clear the text. You can make
new settings.
Note:
If a cooking time is set, the oven stops heating once the
cooking time has elapsed. The automatic switch-off function is
not necessary.
Care and cleaning
With careful care and cleaning your microwave oven will retain
its looks and remain good order. We will explain here how you
should care for and clean your appliance correctly.
:
Risk of electric shock!
Do not use any high-pressure cleaners or steam cleaners,
which can result in an electric shock.
:
Risk of burns!
The appliance becomes very hot. Never touch the interior
surfaces of the cooking compartment or the heating elements.
Always allow the appliance to cool down. Keep children at a
safe distance.
Notes
■
Slight differences in colour on the front of the appliance are
caused by the use of different materials, such as glass,
plastic and metal.
■
Shadows on the door panel which look like streaks, are
caused by reflections made by the oven light.
■
Enamel is baked on at very high temperatures. This can
cause some slight colour variations. This is normal and does
not affect their function. The edges of thin trays cannot be
completely enamelled. As a result, these edges can be
rough. This will not impair the anti-corrosion protection.
■
Unpleasant odours, e.g. after fish has been prepared, can be
removed very easily. Add a few drops of lemon juice to a cup
of water. Place a spoon into the container as well, to prevent
delayed boiling. Heat the water for 1 to 2 minutes at
maximum microwave power.
Cleaning agents
To ensure that the different surfaces are not damaged by using
the wrong cleaning agent, observe the information in the table.
Do not use
■
sharp or abrasive cleaning agents,
■
metal or glass scrapers to clean the glass in the appliance
door,
■
metal or glass scrapers to clean the door seal,
■
hard scouring pads and sponges,
■
cleaning agents with high concentrations of alcohol.
Wash new sponge cloths thoroughly before use.
Slow cooking
Suggestion: 80 °C
from 70 to max. 100 °C
Permanently change default temperature for
the type of heating.
Plate warming
Suggestion: 50 °C
from 30 to max. 70 °C
Permanently change default temperature for
the type of heating.
Keep warm
Suggestion: 70 °C
from 60 to max. 100 °C
Permanently change default temperature for
the type of heating.
MicroCombi, gentle
Suggestion: 180 °C
from 30 to max. 250 °C
Permanently change default temperature for
the type of heating.
MicroCombi, intensive
Suggestion: 200 °C
from 30 to max. 250 °C
Permanently change default temperature for
the type of heating.
Sabbath mode:
no
no
yes
See the Sabbath mode section
Supply voltage:
220-230 V
220-230V
230-240V
Adjusting the operating voltage
Restore factory settings:
no
no
yes
Reverse all changes and restore basic set-
tings.
Basic setting
Options
Explanation
