Siemens HB76A1.60S, Instruction Manual

Page: 10 / 36

10
Setting the type of heating and temperature
Example in the picture: Setting for
%
Top/bottom heating at
180 °C.
Switch on oven with the
‡
button, or press the
"
button.
The
:
symbol for 3D hot air and a temperature of 160 °C are
suggested in the display.
The time is shown in the clock display. The
Î
rotary symbol
next to the type of heating indicates that this can be changed
using the rotary selector.
You can apply this setting immediately with
†
.
If you wish to specify another type of heating and temperature,
proceed as follows.
1. Turn the rotary selector to set the desired type of heating.
2.
Press the
‚
button.
The
Î
symbol changes to the temperature.
3.
Modify the suggested temperature using the rotary selector.
4.
Press the
†
button.
Appliance operation begins.
5.
Once the dish is ready, switch the oven off with the
‡
button.
Changing the temperature or grill setting
This can be done at any time. Turn the rotary selector to
change the temperature or grill setting.
Calling up the heating temperature
Press the
±
button briefly. The current heating temperature in
the cooking compartment is displayed for several seconds.
Opening the oven door
Operation is suspended. The
†
button flashes. When the door
is closed again, operation resumes.
Pausing operation
Press the
†
button briefly. The oven is paused. The
†
button
flashes. To resume, press the
†
button again. The
†
button
lights up. The programme will then continue.
Cancelling operation
Press and hold the
†
button until the
:
symbol for 3D hot air
and 160 °C appear. You can make new settings.
Setting the cooking time
See section
Time-setting options
, setting the cooking time.
Setting a later end time
See the section entitled Time-setting options , Setting a later end
time.
Setting rapid heating
Rapid heating is not suitable for all types of heating.
Suitable types of heating
A short signal sounds to indicate that the selected type of
heating is not suitable for rapid heating.
Suitable temperatures
Rapid heating will not work if the temperature is set to less than
100 °C. If the temperature in the cooking compartment is only
slightly less than the temperature you have set, rapid heating is
not necessary. It will not switch on.
Setting rapid heating
Press the
h
button to activate rapid heating. The
c
symbol
appears next to the temperature. Rapid heating begins. The
temperature indicator bars start filling in.
Once all the bars are filled, rapid heating is complete. You will
hear a short signal. The
c
symbol goes out. Place your dish
in the cooking compartment.
RQ
RII VWDUW
VWRS
ƒ&NJ
0 3
RQ
RII
0 3
VWDUW
VWRS
ƒ&NJ
VWDUW
VWRS
ƒ&NJ
:
3D hot air
%
Top/bottom heating
'
HydroBaking
;
Pizza setting
RQ
RII VWDUW
VWRS
ƒ&NJ 0 3