Siemens HB56 1 Series, Instruction Manual

Page: 9 / 36

9
This configuration can be started directly with the button † .
To program another type of heating and a different
temperature, proceed as follows:
1.
Select the desired type of heating using the control knob.
2.
Press the
‚
button.
The
Î
symbol switches to temperature.
3.
Change the recommended temperature using the control
knob.
4.
Press the
†
button.
The oven comes on.
5.
When the dish is ready, switch off the oven using the ‡
button.
Changing the temperature or grill setting
This can be done at any time. Turn the rotary selector to
change the temperature or grill setting.
Calling up the heating temperature
Press the ± button briefly. The current heating temperature in
the cooking compartment is displayed for several seconds.
Pausing operation
Press the
†
button briefly. The oven is paused. The
†
button
flashes. To resume, press the
†
button again. The
†
button
lights up. The programme will then continue.
Cancelling operation
Press and hold the † button until the : symbol for 3D hot air
and 160 °C appear. You can make new settings.
Setting the cooking time
See section Time-setting options , setting the cooking time.
Setting a later end time
See the section entitled Time-setting options , Setting a later end
time.
Setting the rapid heating function
The rapid heating is not compatible with all types of heating.
Compatible types of heating
When the programmed heating type is not compatible with the
rapid heating, a warning signal is given.
Suitable temperatures
The rapid heating does not work when the set temperature is
below 100 ° C. If the oven temperature is slightly less than the
set temperature, rapid heating is not necessary. Not turned on.
Setting the rapid heating function
Press the button
h
for rapid heating. The symbol
c
is
displayed beside the temperature. Start the rapid heating
function.The temperature control bars fill.
The rapid heating function has ended when all the bars are lit.
A brief sound is given and the symbol
c
switches off. Put the
food in the oven.
Notes
■
Rapid heating is cancelled by adjusting the type of heating.
■
The duration of the programmed cooking time begins to run,
regardless of the rapid heating.
■
The oven temperature reached may be displayed during
heating by pressing on the button
±
.
■
To ensure uniform cooking, the food must not be put into the
oven until rapid heating has been completed.
Cancelling rapid heating
Press the h button. The symbol goes out.
RQ
RII
FOHDQ
0 3
VWDUW
VWRS
ƒ&NJ
VWDUW
VWRS
ƒ&NJ
RQ
RII
VWDUW
VWRS
FOHDQ ƒ&NJ
0 3
:
3D hot air
%
Top and bottom heating
;
Pizza function