Siemens HB56 1 Series, Instruction Manual

Page: 6 / 36

6
Temperature control
The bars on the temperature control indicate the heating
phases or the residual heat inside the oven.
Heating control
The heating control shows the temperature rise in the oven.
When all of the bars are full is the best time to put the food in
the oven.
The bars are not displayed in the grill power and self-cleaning
levels.
The temperature reached may be displayed during heating by
pressing on the ± button . The temperature indicated may vary
slightly from the actual temperature inside the oven as a result
of thermal inertia.
Residual heat
After switching off the appliance, the temperature control will
indicate the residual heat inside the oven. If all of the bars are
full, it means that the oven has reached a temperature of
approx. 270 °C.The display turns off when the temperature falls
below approximately 60 °C.
Inside the oven
There is a light inside the oven. A fan prevents the oven from
overheating.
Light
The oven light remains on while the oven is working. The light
switches off at temperatures of less than 60 ºC and during the
clean function. This ensures optimum precision control.
Fan
The fan can be turned on and off as necessary. The hot air
escapes through the top of the door. Warning! Do not cover the
vent. The oven could overheat.
The fan remains on for a certain length of time after the oven
has been switched off so that it can cool down more quickly.
Your accessories
The accessories supplied with your appliance are suitable for
making many meals. Ensure that you always insert the
accessories into the cooking compartment the right way round.
There is also a selection of optional accessories, with which
you can improve on some of your favourite dishes, or simply to
make working with your oven more convenient.
inserting the accessories
The accessories can be placed inside the oven on 5 different
levels. Always insert them as far as possible so that the
accessories do not touch the door glass.
The accessories can be removed halfway until they are
secured. This makes it easy to remove food.
When inserting an accessory in the oven, make sure the
curvature is at the rear. This is the only way to ensure it fits
perfectly.
Depending on the equipment, if the appliance has guide rails,
these will interlock slightly when fully removed. This means the
accessory can be easily inserted. To unlock, reinsert the guide
rails in the oven exerting slight pressure.
Note:
Accessories may deform as they heat up. This
deformation will disappear when they cool. This does not affect
the normal operation.
Your oven is supplied with only some of the following
accessories.
Accessories may be purchased from the Technical Assistance
Service, from specialist retailers or on the Internet. Enter the HZ
number.
VWDUW
VWRS
ƒ&NJ ƒ&NJ
VWDUW
VWRS
Wire shelf
For cookware, baking tins, roasts,
grilled items and frozen meals.
Insert the wire shelf with the open
end facing the oven door and the
curvature downwards ¾ .
Flat enamel oven tray
For cakes, pastries and biscuits.
Place the tray in the oven with its
raised lip facing the door.
Universal deep enamel tray
For juicy cakes, pastries, frozen
meals and large joints for roasting.
This can also be used as a tray to
collect the fat when roasting directly
on the wire shelf.
Place the tray in the oven with its
raised lip facing the door.