Siemens Gigaset WLAN Operating Instructions Manual Download Page 76

Page: 76 / 130

Advanced Setup

Gigaset WLAN Repeater/ englisch / A31008-E505-B105-1-7619 / advanced_config.fm / 08.03.2004

You now have the following options for advanced configuration:

Click on the menu item to open the function you want.

Operating Mode

Here you can change the operating mode of your device
(page 74).

Security

You can protect your device and your network against eavesdrop-
ping (page 75).

Network

You can configure the wireless network and the LAN (page 83).

Repeater

Here you can change the settings for the repeater (page 75, avail-
able only in repeater mode).

Save & Restore

Use this menu to save and restore the configuration settings
(see page 93), and also restore factory settings (see page 95).

Administration

You can use this menu to reboot the device and update the
firmware (see page 91).

Summary of Contents for Gigaset WLAN



































































































































Search results

Summary of Contents for Gigaset WLAN

Reviews:

Related manuals for Gigaset WLAN

Brands by name

Popular brands

Siemens Gigaset WLAN, Operating Instructions Manual

Search results

Summary of Contents for Gigaset WLAN

Reviews:

Related manuals for Gigaset WLAN

Brands by name

Popular brands