Siemens Gigaset WLAN Operating Instructions Manual Download Page 86

Page: 86 / 130

Advanced Setup

Gigaset WLAN Repeater/ englisch / A31008-E505-B105-1-7619 / advanced_config.fm / 08.03.2004

Network

Use the

Network

menu to make the settings for your network operations. You can pro-

vide parameters for the local network (LAN) and for wireless mode.

LAN

Use LAN configuration to assign a name for your Gigaset WLAN Repeater and determine
the settings for assigning IP addresses.

In the

Network

menu, select

LAN

The configuration options for Repeater and Access point modes (see below) differ from
those for Ethernet adapter (infrastructure) and Ethernet adapter (ad hoc) (see page 87).

Repeater / Access Point

Summary of Contents for Gigaset WLAN



































































































































Search results

Summary of Contents for Gigaset WLAN

Reviews:

Related manuals for Gigaset WLAN

Brands by name

Popular brands

Siemens Gigaset WLAN, Operating Instructions Manual

Search results

Summary of Contents for Gigaset WLAN

Reviews:

Related manuals for Gigaset WLAN

Brands by name

Popular brands