Siemens gigaset SX761 DSL Manual Download

Page: 90 / 118

Status information

Gigaset SX761 dsl / eng / A31008-M707-R111-2x-7619 / admin_router.fm / 06.10.2008

Schabl

one 2

005_0

7_2

Device

System time

The system time of the device.

Firmware version

The firmware version currently installed on the device.

Click

Refresh

to refresh this screen and update the displayed data.

Security

You will find information about possible security risks for the device and the network on

the

Security

screen in the

Status

menu.

In the

Status

menu, select

Security

System password not changed

The configuration program of the device is not sufficiently protected against unau-

thorised access because you have not changed the system password since setting up

the device. Information on how to avoid this security risk is given in the section "Sys-

tem Password" on page 78.

Firewall for your Internet connection turned off

The network is not protected against hackers who gain unauthorised access via the

Internet. Information on how to avoid this security risk is given in the section "Fire-

wall" on page 46.

Address translation for your Internet connection turned off

The clients in the network are not protected against unauthorised access via the

Internet. Information on how to avoid this security risk is given in the section "Set-

ting up the NAT function" on page 50.

One or more of your local clients directly exposed to the Internet

At least one client in the network is directly visible on the Internet as an exposed host

and is therefore particularly exposed to the risk (e.g. through hacker attacks). Only

activate this function if it is absolutely necessary (e.g. to operate a Web server) and

other functions (e.g. Port forwarding) are not suitable. In this case, you should take

the appropriate measures on the clients concerned. Information on how to avoid

this security risk is given in the section "Opening the firewall for a selected PC

(Exposed Host)" on page 54.

Click

Refresh

to refresh the screen and the displayed data.

Summary of Contents for gigaset SX761 DSL























































































































Search results

Summary of Contents for gigaset SX761 DSL

Reviews:

Related manuals for gigaset SX761 DSL

Brands by name

Popular brands

Siemens gigaset SX761 DSL, Manual

Search results

Summary of Contents for gigaset SX761 DSL

Reviews:

Related manuals for gigaset SX761 DSL

Brands by name

Popular brands