Siemens gigaset SX761 DSL Manual Download

Page: 74 / 118

Call guide

Gigaset SX761 dsl / eng / A31008-M707-R111-2x-7619 / telefone.fm / 06.10.2008

Schabl

one 2

005_0

7_2

Call answering and forwarding

Key combination

Effect

Description

*21*[number]#

Forward to

internal

phone number

Dial

*21*

, the desired internal phone

number to which all calls are to be

forwarded that are received on this

extension, and then press the

key.

Example:

You want to set up call for-

warding from your phone to a second

internal phone number.

Dial

*21**2#

#21#

Delete call forward-

ing

Use the key combination

#21#

delete internal call forwarding, which

you set up as described above.

*61*[number]#

Call forwarding to

internal

number if

absent

Dial

*61*

, the desired internal phone

number to which all calls are to be

forwarded that are received on this

extension, and then press the

key.

The call is forwarded after 20 seconds

with this key combination.

#61#

Delete call forward-

ing if absent

Use the key combination

#61#

delete internal call forwarding (if

absent), which you set up as

described above.

*67*[number]#

Call forwarding to

internal

number if

line busy

Dial

*67*

, the desired internal phone

number to which all calls are to be

forwarded that are received on this

extension, and then press the

key.

The call is forwarded with this key

combination if the line is busy.

#67#

Delete call forward-

ing if line busy

Use the key combination

#67#

delete internal and external call for-

warding (if line busy), which you set

up as described above.

#77#

Delete all call for-

warding settings

Use the key combination

#77#

delete all call forwarding settings

described above.

Summary of Contents for gigaset SX761 DSL























































































































Search results

Summary of Contents for gigaset SX761 DSL

Reviews:

Related manuals for gigaset SX761 DSL

Brands by name

Popular brands

Siemens gigaset SX761 DSL, Manual

Search results

Summary of Contents for gigaset SX761 DSL

Reviews:

Related manuals for gigaset SX761 DSL

Brands by name

Popular brands