Siemens Gigaset SL 740 Operating Manual Download Page 34

Page: 34 / 76

MMS

SL 740 / Singapore / A31008-L740-S102-1-7619 / mms.fm / 13.07.2004

Fw:

is automatically added to the

reference line.

Edit

(Incoming/outgoing/"not sent" list)

The content of an MMS message is

copied to a new MMS message.

Pictures/photographs, animations,

sounds, texts and reference are copied,

all other content discarded. The new

MMS message is opened in overview

mode for putting together the MMS

content (p. 30).

Edit

(Draft message list)

The selected MMS message is opened

in overview mode for putting together

the MMS content (p. 30).

Delete Entry

(Draft/"not sent"/ outgoing list)

Delete selected MMS message.

Delete all

(All lists)

Delete all MMS messages in the list.

Copy to Directory

(Incoming message list)

Store telephone number/email

addresses from selected MMS message

in telephone directory/email directory.

Telephone numbers and email

addresses are identified automatically.

Mark as New

(Incoming message list)

Mark selected, already read MMS

message as "new".

Attachments

(Incoming message list)

List of objects attached to the selected

MMS message is displayed. Press

View

Play

to open the selected object in the

appropriate application. Press

Save

save objects in the File Manager

(p. 40). Install selected photographs/

pictures/animations and sounds with

Install

Properties

(All lists)

View properties of the selected MMS

message.

Capacity

(All lists)

Display available memory.

Receiving and viewing MMS
messages

Your phone line is busy while an MMS

message is being sent/received.

Receiving an MMS

Your telephone provides two possible

settings for receiving MMS messages:

Immediate

: MMS messages are sent

direct to your telephone.

Deferred

: MMS messages are saved in

the network. You are notified about the

sender and the size of the MMS

message. You can then download it

from the network at your convenience.

MMS

Settings

Retrieval

Behav.

Immediate

Deferred

Select and press

. (

‰

= on).

Selecting notification:

Notifications are stored in the incoming

message list (p. 32).

Press to open the incoming

message list.

Select notification.

Receive

Press the display key. The MMS

message is downloaded from

the network. Notification is

deleted.

Note:

Bear in mind that you can only download the

MMS message during the period stated under

Expiry

in the notification!

Summary of Contents for Gigaset SL 740













































































Search results

Summary of Contents for Gigaset SL 740

Reviews:

Related manuals for Gigaset SL 740

Brands by name

Popular brands

Siemens Gigaset SL 740, Operating Manual

Search results

Summary of Contents for Gigaset SL 740

Reviews:

Related manuals for Gigaset SL 740

Brands by name

Popular brands