Siemens Gigaset S800 User Manual Download Page 76

Page: 76 / 97

Setting the base

Gigaset S800-S800A / en Großbritannien / A31008-M2125-L101-1-7619 / registr_sett.fm / 20.05.2010

rsion 4.1, 21

.11.2007

Resetting the system PIN

If you have forgotten your system PIN, you
can reset the base to the original code

0000

Disconnect the power cable from the base.
Hold down the registration/paging key on
the base while reconnecting the power
cable to the base. Hold down the key for at
least 5 seconds.

The base has now been reset and the system
PIN set to

0000

Resetting the base to the

factory settings

When the settings are restored:

Date and time are retained

Handsets are still registered

Eco Mode

is activated and

Eco Mode+

deactivated,

The system PIN is not reset.

System

Base Reset

Enter the system PIN and
press

§OK§

§Yes§

Press the display key.

Please note

All handsets are de-registered and must
be re-registered. All settings are reset to
the factory settings.

•

Summary of Contents for Gigaset S800


































































































Search results

Summary of Contents for Gigaset S800

Reviews:

Related manuals for Gigaset S800

Brands by name

Popular brands

Siemens Gigaset S800, User Manual

Search results

Summary of Contents for Gigaset S800

Reviews:

Related manuals for Gigaset S800

Brands by name

Popular brands