Siemens Gigaset S790 User Manual Download Page 75

Page: 75 / 97

Gigaset S790-S795 / en Großbritannien / A31008-M2102-L101-2-7619 / appendix.fm / 29.03.2010

rsion 4.1, 21

.11.2007

Questions and answers

If you have any questions about the use of
your phone, you can contact us 24/7 at
www.gigaset.com/customercare.

The table below contains a list of common
problems and possible solutions.

Gigaset S795 only:

The display is blank.

1. The handset is not switched on.

Press and

hold

the end call key

2. The battery is empty.

Charge the battery or replace it
(

page 12).

Not all menu items are displayed.

The menu display is restricted (

standard mode

Activate extended menu display
(

expert mode

•

) (

page 25).

No Base

flashes on the display.

1. The handset is outside the range of the base.

Move the handset closer to the base.

2. The base's range is reduced because

Eco Mode is activated.

Deactivate Eco Mode (

page 54) or

reduce the distance between the handset
and the base.

3. The base is not switched on.

Check the base power adapter
(

page 10).

Please register handset

flashes on the display.

Handset has not been registered with the base or
has been deregistered.

page 58).

Handset does not ring.

1. The ringtone is deactivated.

Activate the ringtone (

page 66).

2. Call divert set for "

All Calls

Deactivate call divert (

page 31).

3. The phone only rings if the phone number

has been transferred.

Switch on the ringtone for unknown calls
(

page 66).

You cannot hear a ringtone/dialling tone from
the fixed line network.

The phone cord supplied has not been used or
has been replaced by a new cord with the wrong
pin connections.

Please always use the phone cord supplied or
ensure that the pin connections are correct
when purchasing from a retailer
(

page 10).

Error tone sounds after system PIN prompt.

You have entered the wrong system PIN.

Reset the system PIN to 0000 (

page 70).

Forgotten the system PIN.

Reset the system PIN to 0000 (

page 70).

The other party cannot hear you.

You have pressed the mute button

. The

handset is "muted".

Reactivate the microphone (

page 29).

The number of the caller is not displayed
despite CLIP.

Calling Line Identification is not enabled.

The caller

should ask the network provider to

enable Calling Line Identification (CLI).

You hear an error tone when keying an input

descending tone sequence).

Action has failed/invalid input.

Repeat the operation.
Watch the display and refer to the user guide
if necessary.

You cannot listen to messages on the network
mailbox.

Your PABX is set for pulse dialling.

Set your PABX to tone dialling.

No time is specified for a message in the call list.

Date and time have not been set.

Set the date and time (

page 15).

The answering machine announces "PIN is
incorrect" during remote operation.

1. You have entered the wrong system PIN.

Enter the system PIN again.

2. The system PIN is still set to 0000.

Set the system PIN to something other
than 0000 (

page 70).

Summary of Contents for Gigaset S790


































































































Search results

Summary of Contents for Gigaset S790

Reviews:

Related manuals for Gigaset S790

Brands by name

Popular brands

Siemens Gigaset S790, User Manual

Search results

Summary of Contents for Gigaset S790

Reviews:

Related manuals for Gigaset S790

Brands by name

Popular brands