Siemens Gigaset S790 User Manual Download Page 55

Page: 55 / 97

ECO DECT

Gigaset S790-S795 / en Großbritannien / A31008-M2102-L101-2-7619 / registr_sett.fm / 29.03.2010

rsion 4.1, 21

.11.2007

ECO DECT

You are helping to protect the environment
with your Gigaset S790/S795.

Reducing energy consumption

By using a power-saving adapter plug, your
telephone consumes less power.

Reducing radiation

The radiation from your telephone is
reduced

automatically

Handset

: The closer the handset is to the

base, the lower the radiation.

Base station

: The radiation is reduced to

virtually zero when only one handset is
registered and the handset is placed in
the base.

You can reduce the radiation from the
handset and base even more by using

Eco

Mode

Eco Mode

Reduces the radiation of the base station
and handset by 80% - whether you are
making a call or not.

Eco Mode

reduces

the range of the base station by approx.
50%. Using

Eco Mode

always makes

sense when a reduced range is sufficient.

Switching off radiation

Eco Mode+

When you activate

Eco Mode+

radiation

(DECT transmission power) from the base
and handset is switched off in the idle
state.
This is also true when multiple handsets
are used, provided the handsets support

Eco Mode+

Eco Mode / Eco Mode+

can be activated/

deactivated independently of one another
and can also be used with multiple handsets.
The handset must not be placed in the base.

Activate/deactivate Eco Mode /Eco
Mode+:

Eco Mode

Eco Mode / Eco Mode+

§Change§

Press the display key (

= on).

Status displays

Display icon

Ð i Ñ Ò

(flashes)

Signal strength:

– good to poor
– no signal

white

Eco Mode

deactivated

green

Eco Mode

activated

white

Eco Mode+

activated

(displayed instead of the
reception strength icon
when in idle status)

green

Eco Mode and Eco
Mode+

activated

Please note

With

Eco Mode+

activated, press and

hold

the talk key

to check that the

base can be reached. You will hear the
dialling tone if the base can be
reached.

When

Eco Mode+

is activated:

– Call setup is delayed by approx.

two seconds.

– Handset standby time is reduced

by approx. 50%.

Registering handsets that do not sup-
port

Eco Mode+

will cause the mode

to be deactivated on the base and all
other handsets.

Activating

Eco Mode

reduces the

range of the base.

Eco Mode / Eco Mode+

and repeater

support (

page 69) cancel each

other out, i.e., if you use a repeater,
you cannot use

Eco Mode

Eco

Mode+

Summary of Contents for Gigaset S790


































































































Search results

Summary of Contents for Gigaset S790

Reviews:

Related manuals for Gigaset S790

Brands by name

Popular brands

Siemens Gigaset S790, User Manual

Search results

Summary of Contents for Gigaset S790

Reviews:

Related manuals for Gigaset S790

Brands by name

Popular brands