40
SMS (text messages)
Gigaset S790-S795 / en Großbritannien / A31008-M2102-L101-2-7619 / sms_BRD_neutral.fm / 29.03.2010
V
e
rsion 4.1, 21
.11.2007
SMS (text messages)
Your phone is delivered ready to send SMS
messages immediately.
Prerequisites:
u
Calling Line Identification is enabled for
your phone line.
u
Your network provider supports SMS on
the fixed line network (information on
this can be obtained from your network
provider).
u
You are registered with your service pro-
vider to send and receive SMS messages.
u
To receive SMS messages, you must be
registered with your service provider. This
occurs automatically when you send your
first SMS.
Writing/sending an SMS
Writing an SMS
v
¢
Ë
Mailbox 2
Select mailbox if necessary and
press
§OK§
.
~
Enter mailbox PIN if necessary
and press
§OK§
.
New SMS
Select
and
press
§OK§
.
~
Write an SMS.
Sending an SMS
c
Press the talk key
or:
§Options§
Press the display key.
Send
Select and press
§OK§
.
SMS
Select and press
§OK§
.
~
/
s
Select number with access code
(even if you are in that area)
from the directory or enter
directly. For sending SMS mes-
sages to an SMS mailbox: add
the mailbox ID to the
end
of the
number.
§Send§
Press the display key. The SMS is
sent.
Please note
If your phone is connected to a PABX,
please read
Please note
u
For instructions on entering text and
special characters, please see
page 78.
u
An SMS may contain up to
612 characters. If there are more than
160 characters, the SMS is sent as a
linked
SMS (up to 4 SMS messages
with 153 characters each). The top
right of the display shows how many
characters are still available and
which part of a linked SMS is currently
being written.
Please note
u
If you are interrupted by an external
call while writing an SMS, the text is
automatically saved in the draft SMS
list.
u
If the memory is full, or if the SMS
function on the base is being used by
another handset, the operation is can-
celled. An appropriate message
appears in the display. Delete SMS
messages you no longer require or
send the SMS later.