Siemens Gigaset S685 IP Manual Download Page 33

Page: 33 / 278

First steps

Gigaset S675/S685 IP / GBR / A31008-xxxx-xxxx-x-xxxx / starting.fm / 5/18/09

ion 8,

.09

.200

Belt clip and headset

By using a belt clip and headset (optional), you can easily make your handset a

constant companion both inside the building and in its immediate vicinity.

Attaching the belt clip

Connection socket for headset

You can connect various headset types (with 2.5 mm jack connector), includ-

ing HAMA Plantronics M40, MX100 and MX150.
A compatibility list of tested headsets is available on the Internet at:
www.plantronics.com/productfinder

There are notches for attaching

the belt clip on both sides of the

handset at the top and at the

same height as the display.

Press the belt clip onto the back

of the handset so that the pro-

trusions on the belt clip engage

with the notches.

Summary of Contents for Gigaset S685 IP























































































































































































































































































Search results

Summary of Contents for Gigaset S685 IP

Reviews:

Related manuals for Gigaset S685 IP

Brands by name

Popular brands

Siemens Gigaset S685 IP, Manual

Search results

Summary of Contents for Gigaset S685 IP

Reviews:

Related manuals for Gigaset S685 IP

Brands by name

Popular brands