Siemens Gigaset S675 IP Manual Download Page 164

Page: 164 / 254

162

Setting the phone with the PC

S675IP / USA-CAN eng / A31008-xxxx-xxxx-x-xxxx / web_server.fm / 14.05.2009

ion 8,

.09

.200

STUN refresh time

Enter the time intervals at which the phone should repeat the registration with

the STUN server. The repeat is required so that the entry of the phone in the

tables of the STUN server is retained. The repeat is carried out for all activated

VoIP phone numbers.
Ask your VoIP provider for the

STUN refresh time

The default is 240 seconds.
If you enter 0 seconds, the registration will not be repeated periodically.

NAT refresh time

Specify the intervals at which you want the phone to update its entry in the

NAT routing table. Specify an interval in seconds that is a little shorter than the

NAT session timeout.
You should not need to change the preconfigured value for the

NAT refresh time

Outbound proxy mode

Specify when the outbound proxy should be used.

Always

All signaling and voice data sent by the phone is sent to the outbound proxy.

Auto

Data sent by the phone is only sent to the outbound proxy when the phone

is connected to a router with symmetric NAT or blocking firewall. If the

phone is behind an asymmetric NAT, the STUN server is used.
If you have set

STUN enabled

or have not entered a STUN server, the out-

bound proxy is always used.

Never

The outbound proxy is not used.

If you do not make an entry in the

Outbound proxy

field, the phone behaves

independently of the selected mode, as with

Never

Outbound proxy

Enter the (fully qualified) DNS name or the IP address of your provider's out-

bound proxy (maximum 74 characters).

Outbound proxy port

Enter the number of the communication port used by the outbound proxy.
The default port is 5060.

Please note

With many providers, the outbound proxy is identical to the SIP proxy.

Summary of Contents for Gigaset S675 IP































































































































































































































































Search results

Summary of Contents for Gigaset S675 IP

Reviews:

Related manuals for Gigaset S675 IP

Brands by name

Popular brands

Siemens Gigaset S675 IP, Manual

Search results

Summary of Contents for Gigaset S675 IP

Reviews:

Related manuals for Gigaset S675 IP

Brands by name

Popular brands