S675-S685 IP KBA / USA EN / A31008-M1915-R321-1-6043 / install_3pg.fm / 2/12/09
Ve
rs
io
n 5,
23
.0
9.
20
08
7
Preparing the handset
Inserting the supplied batteries and closing the battery cover
Connecting the charging cradle and charging the batteries
>
Check the polarity when inserting the batteries
(see symbols in or on the battery compartment).
>
Only use the recommended rechargeable
batteries.
Once the batteries have been inserted, the handset
switches on automatically.
>
First, align the notches on the
side of the battery cover with
the protrusions on the inside of
the housing.
>
Then press the cover until it
snaps into place.
>
The display is protected by a plastic film. Please remove this protective film.
>
Place the handset in the charging cradle and
wait until the batteries are fully charged.
>
Do not put the handset back in the
charging cradle until the batteries are
fully discharged through use.
>
After the first battery charge
and
dis-
charge, you may place your handset in the
charging cradle after every call.
>
The battery charging status is displayed
in the idle display:
=
e
V
U
(empty to full).
1
2
>
Observe the
sequence
(A then B)!
A
B
