34
Operating the answering machine
Gigaset S455 AM / GBR / A31008-M1714-L101-1-7619 / answering_m.fm / 31.08.2006
Setting the recording time
You can set the maximum recording time
of a message. The options are:
30
,
60
,
120 seconds
or
Maximum
.
v
¢
Ð
¢
Voice Mail
¢
Message Length
r
Select recording time.
§Save§
Press the display key.
Setting recording quality
Set the quality you require for your record-
ings. The options are:
Standard
,
High
,
Excel-
lent
. If the quality is higher the max.
recording time is reduced.
v
¢
Ð
¢
Voice Mail
¢
Record Quality
r
Select the recording quality.
§Save§
Press the display key.
Resetting fast access on the
answering machine
The integrated answering machine is fac-
tory-set for fast access. However if you
have set the network mailbox for fast
access (page 36) you can reset this set-
ting.
v
¢
Ð
¢
Voice Mail
¢
Set Key 1
Answer Machine
/
Network Mailb.
Select and press
§OK§
.
a
Press
and
hold
(idle status).
After you have selected the network mail-
box or the answering machine, press and
hold
key
1
. You will be connected
directly.
The setting for fast access applies to all
Gigaset S45 handsets.
Operating when on the move
(remote operation)
You can check or activate the answering
machine from any other telephone (e.g.
hotel, pay phone) or initiate callback from
the answering machine through an SMS.
Requirements:
u
You have set a system PIN other than
0000 (page 46).
u
The phone you are using for remote
operation has tone dialling (DTMF), i.e.
you hear different tones when you
press the keys. Alternatively, you can
use a code transmitter (available from
your mobile phone retailer).
Calling the answering machine and
playing back messages
~
Dial your own number.
9 ~
While you listen to your
announcement, press the
9
key and enter the system PIN.
You will be informed whether any new
messages have been recorded. The mes-
sages are now played back. You can now
operate the answering machine via the
keypad or by voice prompts.
Operating the answering machine via the
keypad
The following keys are used for operation:
A
Go to the start of the previous
message.
B
Stop playback. Press again to
resume.
3
Go to the next message.
:
Mark message as "new".
0
Delete current message.
