background image

9

First Steps

Gigaset S455 AM / GBR / A31008-M1714-L101-1-7619 / starting.fm / 31.08.2006

Please remember:

u

Always repeat the charging and dis-

charging procedure if you remove the 

batteries from the handset and re-

insert them.

u

The batteries may warm up as they are 

charging. This is not dangerous.

u

After a time the charge capacity of the 

batteries will decrease for technical rea-

sons.

Your answering machine is set with a 

standard announcement.

¤

Set the date and the time, for example 

to ensure the correct time of incoming 

calls is recorded.

Setting the date and time

¤

If you have not yet set the date and 

time, press the display key 

§Time§

 to open 

the input field. 

To change the time, open the input field 

via:

v

 

¢

Ð

 

¢

Date/Time 

¤

Change multiple line input:

Date:

Enter day, month and year in 6-digit 

format.

Time: 

Enter hours and minutes with 4 digits, 

e.g. 

Q M 1 5 

for 07:15 a.m.

§Save§

 

Press the display key.

Display in idle status

Once the phone is registered and the time 

set, the idle display looks as shown here 

(example). If the device has an answering 

machine the answering machine icon 

× 

is also shown in the header.

Your phone is now ready for use.

 

Please note:

After the first battery charge 

and

 discharge 

you may replace your handset in its base after 

every call. 

Ð

V

 

INT 1

 

10.05.05

07:15

INT

SMS

Summary of Contents for Gigaset S455


































































Reviews: