background image

26

Operating the handset

Gigaset S450 IP LBA / IM-Nord_en / A31008-M1713-R221-2-7619 / telephony.fm / 28.3.07

Ve

rs

ion 4,

 16

.09.

2005

Reverting to idle status

You can revert to idle status from any-

where in the menu as follows:

¤

Press and 

hold

 the end call key 

a

.

Or:

¤

Do not press any key: after 2 minutes 

the display will 

automatically

 revert to 

idle status.

Changes that you have not confirmed or 

saved by pressing 

§OK§

§Yes§

§Save§

§Send§

 or 

Save Entry

 

§OK§

 will be lost.

You can find an example of the display in 

idle status on page 1.

Menu guidance

Your telephone's functions are accessed 

using a menu that has a number of levels. 

Main menu (first menu level) 

¤

To open the main menu, press 

with 

the handset in idle status.

The main menu functions are shown in 

the display as a list with icon and name. 

Accessing a function 

¤

Scroll to the function with the control 

key 

q

 and press 

§OK§

Or:

¤

Enter the number that is in front of the 

function in the menu tree (page 17). 

The corresponding submenu (the next 

menu level) is opened.

Submenus 

The functions in the submenus are dis-

played as lists. 
To access a function:

¤

Scroll to the function with the control 

key 

q

 and press 

§OK§

Or:

¤

Enter the number combination that is 

in front of the function in the menu 

tree (page 17). 

Briefly

 press the end call key 

a

 once to 

return to the previous menu level / cancel 

the operation.

Correcting incorrect entries 

You can correct incorrect characters in the 

text by navigating to the incorrect entry 

using the control key. You can then:

u

Press 

X

 to delete the character to the 

left of the cursor.

u

Insert new character to the left of the 

cursor.

u

When entering the time and date etc., 

edit the flashing character.

You will find examples of symbols used, 

menu entries and multiple line input in the 

appendix to this user guide, page 110.

Summary of Contents for Gigaset S450 IP
















































































































































Reviews: