Siemens Gigaset S185 Operating Instructions Manual Download Page 16

Page: 16 / 55

Operating the handset

Gigaset S185 / Canada EN / A31008-M1729-R401-1-5819 / telefony.fm / 22.6.09

Handsfree operation

You can activate the speakerphone at any

time to provide handsfree operation dur-

ing a call.

Activating/deactivating handsfree

Activating while dialing

~ d

Enter the number and press

the handsfree key.

You should inform your caller before

you use the handsfree function so that

they know someone else may be listen-

ing.

Switching between earpiece and

handsfree mode

Press the handsfree key.

During a call and when listening to the

answering machine, switch handsfree on

or off.
If you wish to place the handset in the

charging cradle during a call:

Press and hold the handsfree key

while placing the handset in the base

station. If the handsfree key

does

not light up, press the key again.

For how to adjust the volume, see

page 36.

Muting

You can deactivate the microphone in

your handset during an external call:

Mute

Press the display key on the

left to mute the handset.

Unmute

Press the display key to reacti-

vate the microphone.

Operating the handset

Activating/deactivating the handset

Press and

hold

the end call

key. You will hear the confir-

mation beep.

Activating/deactivating the keypad

lock

Press and

hold

the pound key.

You will hear the confirmation beep. The

icon

appears in the display when the

keypad lock is activated.
The keypad lock is deactivated automati-

cally if someone calls you. It is re-activated

when the call is finished.

Control key

In the description below, the side of the

control key (up, down, right, left) which

you have to press in the different operat-

ing situations is marked in black, for

example

for "press right on the control

key".
The control key has a number of different

functions:

When the handset is in idle status

Open the directory.

Open main menu.

Open list of handsets.

Set the ringtones on the hand-

set (page 36).

Summary of Contents for Gigaset S185
























































Search results

Summary of Contents for Gigaset S185

Reviews:

Related manuals for Gigaset S185

Brands by name

Popular brands

Siemens Gigaset S185, Operating Instructions Manual

Search results

Summary of Contents for Gigaset S185

Reviews:

Related manuals for Gigaset S185

Brands by name

Popular brands