Siemens Gigaset S185 Operating Instructions Manual Download Page 13

Page: 13 / 55

First Steps

Gigaset S185 / Canada EN / A31008-M1729-R401-1-5819 / starting.fm / 22.6.09

The handset registers automatically.

Please do NOT remove your handset

from the base station during the regis-

tration procedure.

The registration can take up to 5 minutes.

During this time

Regstr.Procedure

appears

in the display and the name of the base

station flashes, e.g.

Base 1

. The handset

will be assigned the lowest unassigned

internal intercom number (1–6).
This will appear in the display

when regis-

tration is complete

, for example

INT 1

This means that the number 1 has been

assigned. If the internal numbers 1–6 are

already assigned to other units, the

number 6 is overwritten.

To charge the batteries, leave the handset

in the base station.

For questions and problems see page 43.

Headset socket

Which headsets are compatible?

The following headsets have been tested

with the Gigaset S185:

Plantronics MX200

Plantronics MX250

Top-Nice EP-21-RS (C39453-Z5-C361)

Initial charging of batteries

To charge the batteries, leave the handset

in the base or charging cradle

continu-

ously

for

ten

hours.

The flashing battery icon

in the top

right of the display indicates that the bat-

teries are being charged.
During handset operation, the battery

icon indicates the charge status of the bat-

teries (page 1).

Please remember:

The batteries may feel warm as they are

charging. This is normal.

Note:

– Automatic registration is only possible if no

one is making calls using the base station.

– Each key press interrupts the automatic

registration.

– If automatic registration does not work the

handset will need to be registered manually

(page 30).

– You can change the name of the handset

(page 32).

Note:

– If the handset has switched itself off

because the batteries have no charge and is

then placed in the base station, it will

switch itself on automatically.

– Only place the handset in the base or

charging cradle that is intended for it.

INT 1

Time

Menu

Caution:

Do not charge the handset in charging unit or

base station while the headset is connected.

Summary of Contents for Gigaset S185
























































Search results

Summary of Contents for Gigaset S185

Reviews:

Siemens Gigaset S185, Operating Instructions Manual, Page: 13 / 55

Search results

Summary of Contents for Gigaset S185

Reviews: