10
Making calls
Gigaset E360 / SEA / A31008-M1805-Y701-1-7619 / telephony.fm / 17.03.2010
V
e
rsion 4, 16.0
9
.2005
Making calls
Making an external call/
ending a call
External calls are calls using the public tele-
phone network.
~
(Enter phone number)
¢
c
.
The number is dialled. (You can also
first
press the
c
key [ringtone] and then enter
the number.) The earpiece volume can be
adjusted during the call with the
t
key.
End a call/cancel dialling:
Press the end call key
a
or place the hand-
set in the base station or charging cradle.
Answering a call
The handset indicates an incoming call in
three ways: by ringing, by a display on the
screen and by the flashing handsfree
key
d
.
You can answer the call by:
¤
Pressing the talk key
c
.
¤
Pressing the handsfree key
d
.
¤
Press the display key
§Accept§
.
If the handset is in the base and the
Auto
Answer
function is activated (page 19), the
handset will answer a call automatically
when you lift it out of the base.
If the ringtone is intrusive, press
§Silence§
. The
ringtone is switched off for this call. You can
answer the call so long as it is displayed on
the screen.
Calling line identification
When you receive a call, the caller's number
and/or name is displayed on the screen if the
following conditions are met:
u
Your network provider supports CLIP, CLI
and CNIP:
– CLI (calling line identification):
the caller's number is transmitted
– CLIP (calling line identification
presentation): the caller's number
is displayed
– CNIP (calling name identification pres-
entation): the caller's name is dis-
played
u
You have arranged CLIP or CNIP with your
network provider.
u
The caller has arranged CLI with the net-
work provider.
Displaying the caller's number
The phone number of the caller is shown on
the display or also the name of the caller if
the name has been stored in the directory or
CNIP has been arranged.
Requirements:
1. You have arranged with your network
provider to have the phone number of
the caller (CLIP) or the caller's name
(CNIP) shown on your display.
2. The caller has arranged with the network
provider to allow his/her phone number
to be identified (CLI).
The screen displays
Extern. Call
if you have
not arranged for calling line identification
presentation,
Withheld
if calling line identi-
fication has been withheld by the caller or
Unavailable
if it has not been arranged with
the network provider.
Handsfree operation
You can make calls immediately in handsfree
mode (the
d
key lights up permanently)
after entering the phone number by press-
ing the handsfree key
d
. Toggle between
earpiece and handsfree mode during a call
by pressing the
d
key. The volume can
be adjusted during handsfree operation
with the
t
key.
