Siemens Gigaset CL1, Manual

Page: 27 / 158

6
Making the handset ready for service
Gigaset CL1 / English / A31008-A021-B001-1-6Z19 / starting.fm / 11.09.2003
Making the handset ready for service
The pack contains:
◆
Gigaset CL 1 handset
◆
Power supply unit with power cord
◆
Two batteries
◆
Charger
◆
Operating instructions
Removing the protective film
The display is protected by a plastic film. Please remove the protective film!
Inserting the batteries
◆
Insert the batteries the right way round – see illustration left.
◆
Place the cover on the battery compartment about 3 mm down from the latch and
push it up until it clicks into position.
To open the cover, press on the indentation and push downwards .
Deactivating/activating the handset
To switch the handset on or off, press the end call key
a
.
Afterwards the confirmation tone rings (see page 9). A deactivated handset activates
automatically when placed in the charging shell.
W
◆
Insert only approved, rechargeable batteries of the same type
(page 19)! Never use normal batteries, since these could lead to a
health hazard or cause injury.
◆
Do not use a non-Siemens charging unit as this could damage the
batteries.