Siemens Gigaset CE460 IP R User Manual Download

Page: 12 / 159

Setting up the handset for use

First steps

CE 450 IP R / IM-Ost english / A31008-M1817-R601_1-7619 / starting.fm / 02.03.2007

ion 2,

.12.

2006

Insert the batteries the right way round (see figure).

The polarity is indicated in the battery compartment.

Closing the battery cover

First align the notches on the side of the battery cover with the lugs on the inside of the

casing.

Then press the cover so that it clicks into place.

Attaching the belt clip

There are notches for attaching the belt clip on the side of the handset at the same height

as the display.

Press the belt clip onto the back of the handset so that the protrusions on the belt clip

engage with the notches.

Summary of Contents for Gigaset CE460 IP R
































































































































































Search results

Summary of Contents for Gigaset CE460 IP R

Reviews:

Related manuals for Gigaset CE460 IP R

Brands by name

Popular brands

Siemens Gigaset CE460 IP R, User Manual

Search results

Summary of Contents for Gigaset CE460 IP R

Reviews:

Related manuals for Gigaset CE460 IP R

Brands by name

Popular brands