Siemens Gigaset CE450 IP R User Manual Download

Page: 23 / 159

First steps

Making settings for VoIP telephony on the base station phone

CE 450 IP R / IM-Ost english / A31008-M1817-R601_1-7619 / starting.fm / 02.03.2007

ion 2,

.12.

2006

No connection to the Internet/VoIP server

If one of the following messages is displayed instead of the internal name after the con-

nection assistant is closed, then either a fault has occurred or your information was incom-

plete:

Server not accessible!

The phone has no connection to the Internet.

Check the cable connection between the base station and the modem/Internet connec-

tion.

Check your router's Internet status:

Start the router Web configurator (page 68).

The Internet Status is displayed on the start screen. If necessary, check the access data

stored in the router (page 70).

Check whether the IP address settings for the base station phone and base station router

are compatible.
Please note the following:
– The IP address for the phone must belong to the address block for the router. For

example:the first three parts of the IP addresses for the phone and the router in sub-

net mask 255.255.255.0 must be identical.

– The IP address for the phone must not be assigned to any other LAN subscriber. If the

DHCP server for the router is enabled, then no static IP address can belong to the

address block that is reserved for dynamically assigning IP addresses (default setting:

192.168.1.100 – 192.168.1.150)

– If the phone is to be dynamically assigned an IP address, then the router's DHCP

server has to be activated.

Find the phone's IP address via the handset menu:

§Menu§

Settings

Base

Local Network

(enter system PIN)

IP Address

Start the phone Web configurator with the IP address (page 64).

If no connection can be established:

change the settings on the router (activate DHCP server, change DHCP settings, see

page 79) or

activate dynamic assignment of address to the phone (page 59) or

change the phone's (fixed) IP address (page 59).

Recommendation:

You should restart your base station and the connected devices (PC) as soon as you make changes in

your LAN to IP addresses or address blocks. During the restart you should start the base station first

(page 82) and then the connected devices (PC). This will deactivate old IP addresses and force new

dynamic IP addresses to be assigned/requested.

Summary of Contents for Gigaset CE450 IP R
































































































































































Search results

Summary of Contents for Gigaset CE450 IP R

Reviews:

Related manuals for Gigaset CE450 IP R

Brands by name

Popular brands

Siemens Gigaset CE450 IP R, User Manual

Search results

Summary of Contents for Gigaset CE450 IP R

Reviews:

Related manuals for Gigaset CE450 IP R

Brands by name

Popular brands