Siemens Gigaset CE450 IP R User Manual Download

Page: 85 / 159

Updating the router's firmware

CE 450 IP R / IM-Ost english / A31008-M1817-R601_1-7619 / web_server.fm / 02.03.2007

ion 2,

.12.

2006

Updating the router's firmware

Siemens always provides you with the latest version of the router firmware. This is available

on the Internet at: www.siemens.com/gigaset
To load the new firmware onto your router you must first download it from the Internet

onto your PC.
Then proceed as follows:

Close down all activities on your local network.

Open the following Web page:

Router Settings

Administration

Load Firmware

The version of the firmware currently being used on your router is displayed in the

Current

Firmware Version

line. You can only download firmware with a higher version number from

the PC to the router.

In the

Firmware Update File

field, enter the path name of the file with the firmware you

have downloaded from the Internet. You can also use the

Browse ...

button to navigate

to the file.

Click

Load Firmware

The firmware will now be updated.

Please note:

You should

not

use the base station phone during the firmware update. In

particular, do not reset the base station!

Displaying the security log

The security log lists all disallowed attempts to access the network.

Open the following Web page:

Router Settings

Administration

Security Log

Click

Refresh

to update the display, or

Clear

to delete the log list.

Reboot

You can restart your router if it is not working properly. It should then be ready for use

again.

Open the following Web page:

Router Settings

Administration

Reboot

Click

Reboot

Please note:

– Do not disconnect the base station from either the mains power supply or the local PC during the

updating procedure. Updating can take several (approx. 3) minutes.

– The base station is automatically restarted after a successful update. The registration page will be

displayed again after the restart.

– The base station phone's firmware is not updated during this firmware update. To update the

firmware update for the base station phone see page 57 or page 105.

Please note:

The reboot can take several minutes (depending on the provider). It can therefore take several min-

utes until you have a connection to the Internet again.

Summary of Contents for Gigaset CE450 IP R
































































































































































Search results

Summary of Contents for Gigaset CE450 IP R

Reviews:

Related manuals for Gigaset CE450 IP R

Brands by name

Popular brands

Siemens Gigaset CE450 IP R, User Manual

Search results

Summary of Contents for Gigaset CE450 IP R

Reviews:

Related manuals for Gigaset CE450 IP R

Brands by name

Popular brands