Siemens Gigaset CE450 IP R User Manual Download Page 62

Page: 62 / 159

Setting the base station phone's IP address in LAN

CE 450 IP R / IM-Ost english / A31008-M1817-R601_1-7619 / settings_bs_hs_pabx.fm / 02.03.2007

ion 2,

.12.

2006

Activating/deactivating dynamic assignment

§Menu§

Settings

Base

Local Network

Enter the system PIN and press

§OK§

dynamic IP address

(

‰

= on)

Select and press

§OK§

to change the current settings.

If you deactivate dynamic assignment, you must set the base station, default gateway and

DNS server IP address and subnet mask manually. A corresponding message is displayed.

Viewing/changing the phone's IP address

You can only change the IP address (page 139) if you have deactivated dynamic assign-

ment.
192.168.1.2 has been preset by default.

§Menu§

Settings

Base

Local Network

(enter system PIN)

IP Address

The current IP address is displayed.

If necessary, enter the IP address and press

§OK§

Viewing/changing the subnet mask

You can only change the subnet mask (page 143) if you have deactivated dynamic assign-

ment.
255.255.255.0 has been preset by default.

§Menu§

Settings

Base

Local Network

(enter system PIN)

Subnet Mask

The current subnet mask is displayed.

If necessary, enter the subnet mask and press

§OK§

Please note:

To assign the IP address dynamically, the DHCP server on the router must be activated (page 79).

Please note:

For notes on the IP address, please see page 86 and the glossary on page 139.

Please note:

For notes on the subnet mask, please see page 86 and the glossary on page 143.

Summary of Contents for Gigaset CE450 IP R
































































































































































Search results

Summary of Contents for Gigaset CE450 IP R

Reviews:

Related manuals for Gigaset CE450 IP R

Brands by name

Popular brands

Siemens Gigaset CE450 IP R, User Manual

Search results

Summary of Contents for Gigaset CE450 IP R

Reviews:

Related manuals for Gigaset CE450 IP R

Brands by name

Popular brands