Siemens Gigaset CE450 IP R User Manual Download Page 61

Page: 61 / 159

Setting the base station phone's IP address in LAN

CE 450 IP R / IM-Ost english / A31008-M1817-R601_1-7619 / settings_bs_hs_pabx.fm / 02.03.2007

ion 2,

.12.

2006

Automatic firmware update

Precondition:

The automatic version check is activated (page 106, default setting).

Your phone will check daily whether a newer firmware update is available via the Internet

on the Siemens configuration server. If this is the case, when the handset is in idle status

the message

New firmware available!

is displayed and the message key

flashes.

Press the message key.

§Yes§

Press the display key to confirm the prompt.

Enter the base station system PIN (default setting: 0000).

The firmware will be loaded onto your phone.
Please note that the firmware update may take up to 3 minutes.

Making VoIP settings

For VoIP telephony you need to make the following settings:

IP settings for the telephone connection to the LAN (to the router). You can make these

settings on the handset (page 58) or (if there is already a connection to the PC) via the

phone Web configurator (page 86).

VoIP settings for each of your VoIP accounts (VoIP phone numbers). You can make the

settings for up to six VoIP accounts via the Web configurator.
Alternatively, you can also set and make changes to the first VoIP account (

IP1

, see

page 88) via the handset. You can make the settings with (page 60) or without

(page 60) connection assistants.

Setting the base station phone's IP address in LAN

The base station requires an IP address in order to be "recognised" by the LAN (the router).
The IP address can be assigned to the base station automatically (by the router) or manu-

ally.

If performed dynamically, the router's DHCP server automatically assigns the base

station an IP address. The base station's IP address can be changed according to router

settings.

If performed manually, you assign the base station a static IP address. This may be nec-

essary depending on your network configuration.

Please note:

– If you reply to the request with

§No§

, the display will not be repeated. The message

New firmware

available!

will only be shown again if a newer version of the firmware than the one rejected is

available.

– You can deactivate the automatic version check via the Web configurator (page 106).

Please note:

For how to make the local network settings on the Web configurator, turn to page 86.

Summary of Contents for Gigaset CE450 IP R
































































































































































Search results

Summary of Contents for Gigaset CE450 IP R

Reviews:

Related manuals for Gigaset CE450 IP R

Brands by name

Popular brands

Siemens Gigaset CE450 IP R, User Manual

Search results

Summary of Contents for Gigaset CE450 IP R

Reviews:

Related manuals for Gigaset CE450 IP R

Brands by name

Popular brands