35
Sending SMS (text messages)
Gigaset C300 / GRC EN / A31008-M2203-T101-1-8U19 / sms_BRD_neutral.fm / 10.06.2010
V
e
rsion 4, 16.0
9
.2005
You have the following options:
Active Send Srvc. Cent.
If SMS messages are to be sent via this
SMS centre, press
§OK§
to activate the SMS
centre (
³
= on). If a different SMS centre
was active previously, then this will be
deactivated. For SMS centres 2 and 3, the
setting only applies to the next SMS.
SMS centre #
Enter the number of the SMS centre and
press
§OK§
.
Sending an SMS via another SMS
service centre
¤
Activate the SMS centre (2 or 3) as the
active send service centre.
¤
Send the SMS.
This setting only applies to the next SMS to
be sent. Thereafter, the setting returns to
SMS centre # 1
.
Receiving SMS messages on
a PABX
u
You can only receive an SMS when
Call-
ing Line Identification
is
forwarded
to the extension of the PABX
(CLIP)
.
The CLIP evaluation of the SMS centre
number is completed in your
Gigaset
.
u
Depending on your PABX, you may have
to add the access code (external line pre-
fix) before the number of the SMS centre.
If in doubt, test your PABX, e.g., by send-
ing an SMS to your own number: once
with and once without the access code.
u
When you send SMS messages, your
sender number may be sent without your
extension number. In this case, the recip-
ient cannot reply to you directly.
Sending and receiving SMS messages
on
ISDN PABXs
is only possible via the MSN
number assigned to your base.
Activating/deactivating SMS
function
If you deactivate the SMS function, you can-
not send or receive any SMS messages with
your phone.
The settings you have made for sending and
receiving SMS messages (e.g., the numbers
of the SMS service centres) and the entries in
the incoming and outgoing lists are saved
even after deactivation.
§Menu§
Open main menu.
*#Q5#23
Enter the digits.
Q
§OK§
Deactivate the SMS function.
Or:
§OK§
Activate the SMS function
(default setting).
