Siemens Gigaset C1 User Manual Download Page 77

Page: 77 / 300

Operating more than one handset

S1_SL1 / englisch / A31008-M373-B103-1-7619 / several_handsets.fm / 08.06.2004

Operating more than one handset

Using a handset as a room monitor

With this function, a previously stored internal or external number is called when a set

noise level in the room is reached (the baby cries). When you answer the call you hear

the noise in the baby's room. The room monitor

remains

activated

on the handset even

after you hang up.
The handset should be between 1 and 2 metres away from the baby. The microphone

must be directed towards the baby.
When the room monitor is activated, incoming calls to the handset which is near the

baby are indicated

without a ring tone

, they are just shown on the display. The display

and the key pad are not illuminated.

When entering an external phone number, check the following:

◆

the handset must have the authorisation

Unrestricted

(page 92)

◆

the number where the room monitor call is forwarded must not be blocked by an

activated answering machine.

Always check the settings of the room monitor before you leave

home, e.g. sensitivity and phone line.

◆

If you redirect your room monitor to an external number, then you

should tell that number's owner.

◆

A room monitor stops calling an

external

number after around

90 seconds. A room monitor stops calling an

internal

number

(handset) after around 3 minutes.

◆

After the room monitor makes a call, the room monitor is blocked for

2 minutes.

◆

The room monitor function severely curtails the handset's operating

time. If possible, place any handset that is in the vicinity of a baby in

the charger. This ensures that the battery does not discharge.

◆

The room monitor function can also be used in Walk and Talk mode

(page 80).

Summary of Contents for Gigaset C1













































































































































































































































































































Search results

Summary of Contents for Gigaset C1

Reviews:

Related manuals for Gigaset C1

Brands by name

Popular brands

Siemens Gigaset C1, User Manual

Search results

Summary of Contents for Gigaset C1

Reviews:

Related manuals for Gigaset C1

Brands by name

Popular brands