9
Giga 3000 Comfort, IM1-engl, A31008-G3000-B002-3-6Z19 3000co.fm
05.01.00
Registering the handset
You can change the display language (see page 21). After
doing this, switch your handset off and then on again.
You must register a new handset at the base station before
you can make any telephone calls. When you switch on your
handset, the message
5HJLVWHU"
*
appears.
Step 1:
• You must first prepare the
Siemens base station
:
Step 2:
• Now enter the following
in the handset within one
minute
:
<(6
Press the display key.
Enter base PIN
Ö2.Ö
Enter the base station’s system PIN (fac-
tory setting: 0000) and confirm – unas-
signed internal numbers are displayed.
e.g.
s
Enter the required call number – the base
name, e.g.
%DVH
, is displayed (no
longer flashing).
Your handset is now ready for use!
*
English is the default factory setting
Gigaset
Preparing the base station
3010/pocket
3015
Press the coloured key on the base station
for approx. 10 seconds
until you hear the
signal tones
.
3020, 3025
3030, 3035
In the base station menu select registration
option and confirm.
ISDN
models
Press the LED – flashes during registration.
1000/2000
models
See above for appropriate successor models
in the 3000 range, e.g. 3010 for 2010.
– To register at multiple base stations or to change base
names, see page 23.
– To modify the internal call number: re-register your hand-
set at the same base, see page 23.
