50
System Settings
3. Press
OK
. Highlight Save Entry and press
OK
to store your
entry or save your changes. Highlight Cancel and press
OK
to discard your changes.
'HUHJLVWHU
Deregistration cancels a handsets synchronization with a base
controller. You can deregister in Base Settings, but it is preferable
to deregister here, in System Settings. A System Settings dereg-
istration lets both the base and handset know that the handset
has been deregistered. When you deregister a handset in Base
Settings, only the handset knows that it is deregistered.
To deregister in Base Settings, see page 39. You cannot deregis-
ter the handset you are using.
To deregister :
1. Highlight Deregister and press
OK
.
2. Highlight the desired handset and press
OK
.
)DFWRU\'HIDXOWV
You may find, as you become familiar with the Gigaset 2402, that
you prefer the original settings. You can restore these settings
with the Factory Defaults menu.
There are two groups of settings: the ones that apply to only one
handset and those that apply to all handsets in the system. This
menu resets the system (all handsets) settings to factory default.
Restoring factory defaults here, in the System Settings menu,
may affect the way entries are presented in a handsets Call Log
and Directory, but not the entries themselves. See Appendix C:
Programming Worksheet on page 59 for a list of the settings
which will be affected by this action.
To reset the system settings factory defaults, highlight Factory
Defaults and press
OK
. Press
OK
again to confirm the reset.
Gigaset 2402.book Seite 50 Dienstag, 6. Juli 1999 5:53 17
