Siemens Gigaset 108 User Manual Download Page 128

Page: 128 / 142

128

Appendix

Gigaset WLAN Repeater 108 / englisch / A31008-M1030-B101-3x-7619 / appendix.fm / 06.11.2008

plat

e 20

05_0

5_02

Garantiperiode

Lovfestede minimumsperioder for tilsvarende garantier vil alltid gå foran våre regler,

men ikke mer enn 24 måneder.

Garantiperioden begynner den datoen kunden kjøper apparatet.

En utført garantiytelse medfører ikke at garantiperioden forlenges.

Garantiytelser behandles over hele landet i våre kundeservicesentre.

Garantigiver er Gigaset Communications GmbH, Schlavenhorst 66, D-46395 Bocholt,
Germany.

Merk:

Ved innfrielse av garantien ber vi deg kontakte ditt nærmeste «Kundeservice (Customer
Care)».

Producentens Garanti Danmark

Slutbrugeren ydes en af forhandleren uafhængig fabriksgaranti på nedenstående vilkår:

Hvis der inden for de første 24 måneder efter køb opdages mangler på udstyret og

de tilhørende komponenter som følge af produktions- og materialefejl, kan Gigaset

Communications frit vælge, om man vil foretage ombytning med et nyt, tidssva-

rende udstyr eller afhjælpe manglen gennem reparation. På dele, som udsættes for

slitage (batterier, tastatur og bælteclips), ydes 6 måneders produktgaranti.

Garantien bortfalder, hvis manglen skyldes forkert anvendelse og/eller manglende

overholdelse af betjeningsvejledningens instruktioner.

Garantien kan ikke udstrækkes til at omfatte servicearbejde udført af den autorise-

rede forhandler eller kunden selv (f.eks. installation, konfigurering og downloadet

software). Vejledninger og software leveret på et særskilt datamedium er heller ikke

omfattet af garantien.

Købskvitteringen skal sammen med købsdatoen anvendes ved fastlæggelsen af, om

en given reklamation ligger inden for reklamationsperioden. Reklamationer under

garantien skal fremsættes senest to måneder efter, at manglen er blevet opdaget.

Gigaset Communications har ret til at beholde udstyr og komponenter, der ombyttes

eller returneres til Gigaset Communications.

Garantien omfatter nyt udstyr købt inden for EU. For produkter, der er solgt i Dan-

mark, er garantien udstedt af Gigaset Communications GmbH, Schlavenhorst 66, D-

46395 Bocholt, Germany.

Krav, der ikke er omfattet af garantien, kan ikke imødekommes. Gigaset Communi-

cations kan ikke holdes ansvarlig for driftsforstyrrelser, formuetab eller tab af data

og software samt andre informationer, som bruger selv har downloadet/indtastet.

Hvis der ikke foreligger mangler, der er omfattet af denne garanti, forbeholder Giga-

set Communications sig ret til at debitere kunder for ombytning eller reparation.

Ovenstående regler ændrer ikke bevisbyrden til skade for kunden.

Summary of Contents for Gigaset 108















































































































































Search results

Summary of Contents for Gigaset 108

Reviews:

Brands by name

Popular brands

Siemens Gigaset 108, User Manual

Search results

Summary of Contents for Gigaset 108

Reviews:

Brands by name

Popular brands