manualshive.com logo in svg

Siemens Gigaset 108, User Manual

Share
Download
Siemens Gigaset 108 User Manual Download Page 119

119

Appendix

Gigaset WLAN Repeater 108 / englisch / A31008-M1030-B101-3x-7619 / appendix.fm / 06.11.2008

Te

m

plat

e 20

05_0

5_02

Authorisation 

This device is intended for use within the European Economic Area and Switzerland. If 
used in other countries, it must first be approved nationally in the country in question.
Country-specific requirements have been taken into consideration.
We, Gigaset Communications GmbH, declare that this device meets the essential 
requirements and other relevant regulations laid down in Directive 1999/5/EC.
A copy of the 1999/5/EC Declaration of Conformity is available at this Internet address:
www.gigaset.com/docs.

Approval

United Kingdom

All electrical and electronic products should be disposed of separately from the 
municipal waste stream via designated collection facilities appointed by the 
government or the local authorities.
This crossed-out wheeled bin symbol on the product means the product is 

covered by the European Directive 2002/96/EC.
The correct disposal and separate collection of your old appliance will help prevent 
potential negative consequences for the environment and human health. It is a precon-
dition for reuse and recycling of used electrical and electronic equipment.
For more detailed information about disposal of your old appliance, please  contact your 
local council refuse centre or the original supplier of the product. 

Ireland

All electrical and electronic products should be disposed of separately from the 
municipal waste stream via designated collection facilities appointed by the 
government or the local authorities.
This crossed-out wheeled bin symbol on the product means the product is 

covered by the European Directive 2002/96/EC.
The correct disposal and separate collection of your old appliance will help prevent 
potential negative consequences for the environment and human health. It is a precon-
dition for reuse and recycling of used electrical and electronic equipment.
For more detailed information about disposal of your old appliance, please  contact your 
city office, waste disposal service or the shop where you purchased the product. 

Sverige

Alla elektriska apparater ska avfallshanteras separat från vanligt hushållsavfall 
på för ändamålet avsedda platser.
Om en symbol med en överstruken soptunna finns på en produkt gäller direktiv 

2002/96/EC för produkten.

Summary of Contents for Gigaset 108















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands