Siemens GI81NH Series, User Manual

Page: 23 / 52

Troubleshooting
en
23
Fault Cause and troubleshooting
Temperature display
flashes.
▶
Do not exceed the max. freezing capacity.
→
"Freezing capacity", Page 19
The temperature dis-
play flashes, a warn-
ing signal sounds and
lights up.
Different causes are possible.
▶
Press .
a
The alarm is switched off.
The appliance door is open.
▶
Close the appliance door.
The exterior ventilation grilles are blocked.
▶
Remove any obstructions from in front of the exter-
ior ventilation grilles.
Larger quantities of fresh food have been put in.
▶
Do not exceed the max. freezing capacity.
→
"Freezing capacity", Page 19
The temperature dif-
fers greatly from the
setting. Different causes are possible.
1.
Switch off the appliance. → Page 14
2.
Switch the appliance back on after five minutes.
→
Page 14
‒
If the temperature is too warm, check the temper-
ature again after a couple of hours.
‒
If the temperature is too cold, check the temper-
ature again on the following day.
The appliance hums,
bubbles, buzzes,
gargles, clicks or
crackles. Not a fault. A motor is running, e.g. refrigerating unit,
fan. Refrigerant flows through the pipes. The motor,
switches or solenoid valves are switching on or off.
Automatic defrosting is running.
No action required.
The appliance makes
noises. Fittings wobble or stick.
▶
Check the removable fittings and, if required, re-
place these.
Containers are touching.
▶
Move the containers apart.
Super freezing is switched on.
No action required.