m
Instrucciones de seguridad importates
LEA Y CONSERVE ESTAS INSTRUCCIONES
Use sartenes del tamaño adecuado. El uso de utensilios
de menor tamaño expondrá una parte de elemento
calefactor o quemador al contacto directo, lo que puede
dar como resultado que se incendie la ropa. Seleccione
utensilios de fondo plano y de tamaño suficiente para
cubrir la unidad de calentamiento de superficie. Este
electrodoméstico está equipado con una o más
unidades de superficie de diferentes tamaños. La
correcta relación entre utensilios y elementos de calor o
quemadores también mejora la eficiencia.
Coloque los mandos de los utensilios hacia dentro, de
forma que no sobresalgan de las zonas de trabajo
adyacentes, quemadores o del borde de la estufa. Así
minimiza el riesgo de incendios, vertidos o quemaduras.
Ajuste el tamaño de la flama para que no se salga del
borde de los utensilio de cocina. La relación correcta
entre el tamaño de los utensilios de cocina y el tamaño
de la flama reduce los riesgos de seguridad.
70
Connect the regulator Figure 3 (2) to the manifold
Figure 3 (1) as shown by the arrow on the regulator
,
applying teflon to the threads.
Connect the pressure regulator to the gas grid
IMPORTANT INFORMATION
Ensure that a bag containing component 2 is
supplied with the appliance. If this component
is missing, call our Technical Service. Use the
parts we supply to complete the gas
connection.
Connection using a metal pipe. In this case, contact
between this tube and the moving parts of the
kitchen unit (for example, a drawer) and its passage
through areas that could be blocked, must be
avoided.
The manufacturer accepts no responsibility for
leaks or connections carried out by the installation
technician.
1
2
The voltage and total power must be checked on
the specifications plate. This appliance must be
grounded.
Always ensure that all connections have been
The electrical connection (CA 110-127 V) is
established by a connection cable with a grounding
contact plug connected to a grounded outlet to
which there must be access after installation of
Electrical connection
Before connecting the power cable to the wall
off valve and the pressure regulator. Figure 3.
using a flexible gas line fitting between the shut-
the gas cooktop.
the control knobs of the burners are set to "off".
outlet, make sure the gas shut-off valve and all
torque. Never tighten to more than 26 ft-lbs of tor-
resistant to the action of LP gas.
made in accordance with code requirements.
Thoroughly follow the requisites of the local
electric power company.
All gas connections must be tested for leaks using
an appropriate liquid solution. Never use a flame
to test for gas leaks.
que. Always use an approved pipe joint compound
,
Leak testing of the appliance shall be conducted
according to manufacturer
s
instructions.
The gas connection must be in a place that permits
manual shut-off valve before connecting the
appliance.
All operations relative to installation, adjustment
and adaptation to another gas type must be carried
out by authorized personnel from our Technical
requisites of the gas companies must be complied
with.
type and pressure match the settings of the
appliance.
Service, and the codes in force, as well as the
4 -
Before connecting the appliance, ensure that
Ensure that the gas supply is cut off through the
access to the manual shut-off valve and is visible
the local connection conditions, as well as the gas
upon opening the kitchen cabinet door.
Tighten the appliance regulator to 15 to 22 ft-lbs of
is equipped with a three prong
grounding
tection against shock hazard
and should be plugged
tly into a properly grounded
receptacle.
Do not cut or remove the
grounding prong from
this plug.
WARNING:This appliance
plug for your pro-
direc-
Fig. 3
Figure. 2a
Figure. 2b
Figure. 2c
23
Summary of Contents for Gas hob
Page 2: ......