Preparation for use and operation
Switching the notebook on for the
fi
rst time
Switchingon forthe
fi
rsttime
When you switch your notebook on for the
fi
rst time, the supplied software is
installed and con
fi
gured. Due to the fact that this installation procedure must not
be interrupted, you should set aside enough time for it to be fully completed and
connect the notebook to the mains outlet using the mains adapter.
During installation, the notebook must only be rebooted when you are requested to do so!
Your operating system is pre-installed on the hard disk to facilitate the procedure
when you use your notebook for the
fi
rst time.
►
Switch the notebook on (see
"Switching on the Notebook", Page 7
).
►
During installation, follow the on-screen instructions.
Consult the operating system manual if anything is unclear about the requested input data.
If a Windows operating system is installed on your notebook, you will
fi
nd
additional information on the system as well as the drivers, help programs,
updates, manuals, etc. on your notebook or on the "Drivers & Utilities" CD/DVD
or on our website (see
Switching on the Notebook
2
1
►
Slide the release button in the direction
of the arrow (1) and unfold the LCD
screen upward (2).
Notebook:
1
►
Press the ON/OFF switch (1) to switch
the notebook on.
The power-on indicator is lit.
10600900852, edition 1
English - 7
