Alarm verification concept (AVC)
Attendance check
7
30 | 40
Building Technologies
009310_l_en_--
Fire Safety
2018-08-29
7.1 Attendance check
Should an event ('Pre-ALARM', 'ALARM') arise, the operating personnel may
acknowledge presence within the time t1. After acknowledgement, the investigation
time t2 starts. If presence is not acknowledged within the given time t1, ↑ global
alarming is activated.
7.2 Investigation time
During the investigation time t2 the operating personnel may examine the indicated
source of alarm and check the cause of the 'ALARM':
● Is it a real fire = Major incident?
● Is it a smoldering waste-paper basket = Minor incident?
● Has the ↑ installation detected a deceptive phenomenon = False alarm?
In the event of a major incident (emergency), the nearest 'Manual call points' or
<Alarm delay off> must be pressed. ''Immediate global alarming'' is then triggered.
In the case of a ↑ minor incident or ↑ false alarm the operator may reset the
'ALARM' and cancel alarming.
If the 'ALARM' is not reset within the given time t2, 'Immediate global alarming' is
activated.
7.3 Example of a verification process
Alarm verification proceeds as follows:
● An alarm event activates ↑ local alarming and starts the time t1 for attendance
check.
● Operating personnel acknowledge 'ALARM' on the operating terminal prior to
the expiry of t1. Acknowledging normally silences local alarming (configurable
feature).
If there is no acknowledgment, ↑ global alarming is activated after the expiry of t1.
● After acknowledgement, the investigation time t2 starts. During time t2
operating personnel investigate the fire location.
– In the case of a minor incident the operator resets the 'ALARM' at the
nearest operating terminal. The alarming process stops, and no global
alarming is activated.
– In the event of a fire, the nearest 'Manual call points' or <Alarm delay off>
must be pressed. 'Immediate global alarming' is triggered.