background image

About this document
Applicable documents

1

6 | 50
Building Technologies

008109_m_en_--

Fire Safety

2016-02-09

Document identification

The document ID is structured as follows:

ID code

Examples

ID_ModificationIndex_Language_COUN

TRY
-- = multilingual or international

A6V10215123_a_de_DE
A6V10215123_a_en_--
A6V10315123_a_--_--

Date format

The date format in the document corresponds to the recommendation of

international standard ISO 8601 (format YYYY-MM-DD).

Conventions for text marking

Markups
Special markups are shown in this document as follows:

Requirement for a behavior instruction

1.

2.

Behavior instruction with at least two operation sequences

      –

Version, option, or detailed information for a behavior instruction

      

Intermediate result of a behavior instruction
End result of a behavior instruction
Numbered lists and behavior instructions with an operation

sequence

 X]

Reference to a page number

'Text'

Quotation, reproduced identically

<Key>

Identification of keys

>

Relation sign and for identification between steps in a sequence,

e.g., 'Menu bar' > 'Help' > 'Help topics'

 Text

Identification of a glossary entry

Supplementary information and tips

The 'i' symbol identifies supplementary information and tips for an easier way of

working.

Summary of Contents for FDS221-R



















































Reviews: