Siemens FDOOT241-A9-Ex, Technical Manual

Page: 5 / 26

About this document
1
Technical terms
1 About this document
Goal and purpose
This document only contains information about modernizing existing collective Ex
detector lines with the following multiple protocol detectors:

Neural fire detector FDOOT241-A9-Ex

Neural fire detector OOH740-A9-Ex
This document does not cover the process of planning new detector lines in areas
at risk of explosion. Please refer to document A6V10324618 for information on this.
You will find details on the individual multiple protocol detectors, such as technical
data, in the following documents:
Multiple protocol detectors Technical manual
FDOOT241-A9-Ex A6V10346580
OOH740-A9-Ex A6V10367521
See chapter ' Applicable documents [➙ 8]'.
Following the instructions consistently will ensure that the product can be used
safely and without any problems.
Target groups
The information in this document is intended for the following target groups:
Target group Activity Qualification
Product Manager

Is responsible for information passing
between the manufacturer and regional
company.

Coordinates the flow of information
between the individual groups of people
involved in a project.

Has obtained suitable specialist training
for the function and for the products.

Has attended the training courses for
Product Managers.
Project Manager

Coordinates the deployment of all
persons and resources involved in the
project according to schedule.

Provides the information required to run
the project.

Has obtained suitable specialist training
for the function and for the products.

Has attended the training courses for
Project Managers.
Installation personnel

Assembles and installs the product
components at the place of installation.

Carries out a performance check
following installation.

Has received specialist training in the
area of building installation technology
or electrical installations.
Commissioning personnel

Configure the product at the place of
installation according to customer-
specific requirements.

Check the product operability and
release the product for use by the
operator.

Searches for and corrects malfunctions.

Has obtained suitable specialist training
for the function and for the products.

Has attended the training courses for
commissioning personnel.
Maintenance personnel

Carries out all maintenance work.

Checks that the products are in perfect
working order.

Searches for and corrects malfunctions.

Has obtained suitable specialist training
for the function and for the products.
5
Building Technologies A6V10443621_a_en_--
Fire Safety 2014-09-01