Structure and function
Function
3
17 | 32
Building Technologies
A6V10201150_d_en_--
Fire Safety
2018-12-19
3.3 Function
3.3.1 Danger levels
The manual call point can transmit the following danger levels to the control panel:
Danger level
Meaning
0
Normal state, no danger
3
Alarm
The evaluation of the danger level and the resulting measures (e.g. activation of
remote transmission) are configured on the control panel.
3.3.2 Test mode
The manual call points can also be tested with the key.
A test mode must be set on the control panel to test the manual call points. When
in test mode, alarms from the manual call points are not forwarded by the control
panel.
See also
2
