![Siemens Euroset 825 Operating Instructions Manual Download Page 57](http://html.mh-extra.com/html/siemens/euroset-825/euroset-825_operating-instructions-manual_384013057.webp)
53
NEC, euroset 825 IM English: A30350-X102-X22-1-7619
22.1.97
825I-E2.FM
Operating in a telephone system
When the phone is being used in a telephone system, you must first of all dial an
exchange code (e.g. 0) to gain access to the public network, and then wait until you
hear the exchange dialing tone.
When using an exchange code or main PBX code, you must pause for the requisite
time when dialing. When putting your telephone into operation for the first time in a
telephone system, you must set the exchange code and main PBX code for dialing
external phone numbers or for dialing into the main PBX (including with a signal key as
a code).
You can program up to three exchange codes (each with up to three digits) and one
main PBX code.
Note:
The emergency numbers 110 and 112 are already stored in your telephone when it
leaves the factory. You have to change these and store your exchange code as well
(see page 41).
When using your telephone within a telephone system, you must also follow the
instructions for your PBX.
c
Lift the handset.
Press the F key.
Choose "Settings" from the
menu, and enter the PIN.
Confirm the "Exchange /
main PBX codes" menu
item.
Confirm the "Exchange
code" menu item.
Choose "Store exchange
code" from the menu.
In the display, you will see
the field for entering the first
exchange code.
o
1. Enter the exchange code:
e.g. 0.
N
Confirm the entry.
Exchange code 1 is stored.
You can enter two more.
Note:
You can also store the recall key (signal key) as an exchange code. This will be shown
in the display with "R".
Storing an exchange code
Phone book?
>
<
f
Phone book?
Phone menu:
Settings?
■
Enter PIN:
Exch./main PBX codes?
Exchange code?
Exch./main PBX codes:
Exchange code?
>
<
Exch. code list/change?
Exchange code:
Store exchange code?
Exchange code1?
■
Exchange code1?
0
■
Entry stored!