manualshive.com logo in svg

Siemens ETU745, Application Manual, Page: 25 / 124

Share
Download
Siemens ETU745 Application Manual Download Page 25

23

WL Circuit Breaker Selection and Application Guide

WL Circuit Breaker

Accessories

Neutral current sensor – 4-wire residual ground fault

For 4-wire residual ground fault protection we offer neutral 
current sensors with or without bus bar coupling. The sensors are 
comparable to the sensors used within the breaker and connected 
to the ETU. This sensor must also be wired to the ETU through 
designated secondary disconnects on the breaker. 

Without copper bus adapters:
   

3” max bus bar width order part number  

WLNCT2

   

3 - 5” bus bar width order part number  

WLNCT3

With copper bus adapters: 
   

3” max bus bar width order part number  

WLNCT2CB

   

3 - 5” bus bar width order part number  

WLNCT3CB

Breaker door cover

A transparent hinged door cover is available to provide IP55  
protection. Provision for padlocking included. Fits frame size 2 
and 3 breakers. Order part number 

WLPGC

Door sealing frame

For openings around the door cutout of the breaker, this rubber 
door trim is available. For frame size 2 and 3 breakers only.
Order part number 

WLDSF

Breaker lifting 

The breaker lifting yolk is designed to transport the WL breaker 
when using a hoist or other lifting equipment. The device is  
expandable to conform to all three WL frame sizes and easily  
attaches to specified lift points on the breaker. Order part 
number 

WLLFT 

Remote Breaker Racking Device

Provides the ability to safely rack WL breakers into the Connect, 
Test and Disconnect positions from 30 feet away from the breaker, 
allowing the operator to be outside the arc flash boundary which 
provides additional personnel protection. 

WLRBRD

 

Door Bracket Kit, Remote Breaker Racking Device

 

In order to mount the remote breaker racking device on existing  

 

gear, this retrofit door bracket kit and the WLRBRDTEMPL must be  

 ordered. 

WLRBRDKIT 

 

Remote Breaker Racking Device Door Bracket Install Template

 

In order to mount the remote breaker racking device on existing  

 

gear, this mounting template and the WLRBRDKIT must be  

 ordered. 

WLRBRDTEMPL

Breaker Hoist

This device acts as a hoist for the WL breaker, allowing it to be 
carried using a forklift or similar device.

 WLHOIST

Courtesy of NationalSwitchgear.com

Summary of Contents for ETU745





























































































































Reviews:

No comments