4
Getting to know your appliance
An overview of the models with their dimensions is given on
page 2
.
The control panel
Controls
When you touch a symbol, the respective function is activated.
Notes
■
The settings will remain unchanged if you touch several
symbols at once. This allows you to wipe up spills on the
control panel.
■
Always keep the controls dry. Moisture reduces their
effectiveness.
The hotplates
â
Hotplates with bridge heating element
Two individual hotplates can be interconnected with a bridge
heating element to create one large extended cooking zone
Under normal operation, these hotplates both work just like
normal single-circuit and dual-circuit hotplates.
To activate the bridge heating element: at least one hotplate
must be switched on. Touch the
ç
symbol. The indicator lamp
is then lit and the extended cooking zone is switched on.
The bridge heating element can also be switched on when both
hotplates are in operation. The extended cooking zone is then
set to the lower heat setting of the two hotplates. You can also
change the heat setting using the control panels for the two
hotplates.
The outer filament circuit on the dual-circuit hotplate and the
extended cooking zone cannot be switched on at the same
time. If one is switched on, the other is automatically disabled.
To switch off the bridge heating element: touch the
ç
symbol.
The hotplates are switched off
Residual heat indicator
The hob has a two-stage residual heat indicator for each
hotplate.
If
•
appears in the display the hob is still hot. It may be used,
for example, to keep a small meal warm or to melt cooking
chocolate. As the hotplate cools down further, the display
changes to
œ
. The display remains lit until the hotplate has
cooled sufficiently.
PLQ
ORZ
PHG
PD[
PLQ
ORZ
PHG
PD[
'LVSOD\VIRU
KHDWVHWWLQJ
³
É
UHVLGXDOKHDW
¤
'LVSOD\VIRU
IU\LQJVHWWLQJV
VHQVRUIU\LQJ
V\VWHP
'LVSOD\PHQXIRU
IU\LQJVHWWLQJV
'LVSOD\IRU
WLPHU
&RQWUROVIRU
KRWSODWH
«
WULFLUFXLWKRWSODWH
k
GXDOFLUFXLWKRWSODWH
ZLWKH[WHQGHGFRRNLQJ]RQH
Æ
DXWRPDWLFSURJUDPPHV
6HWWLQJVUDQJH
IRUVHWWLQJWKHKHDWVHWWLQJ
IRUVHWWLQJWKHWLPHU
&RQWUROVIRU
PDLQVZLWFK
FRQWUROSDQHOSDXVH
WLPHU
6
IU\LQJVHQVRU
Í
GXDOFLUFXLWKRWSODWH
Hotplate
Activating and deactivating
$
Single-circuit hotplate
ð
Dual-circuit hotplate
Touch the
ð
symbol
ò
Tri-circuit hotplate
Touch the
ò
symbol
When the hotplate is activated: the corresponding display lights up.
When the hotplate is switched on: the last selected size is automatically selected again
