Automatic safety cut-out
en
9
When the time has elapsed,
When the cooking time has elapsed, the hotplate
switches off. You will hear an audible signal and
‹‹
lights up in the display for 10 seconds. The indicator
x
flashes. Touch any symbol. The displays go out and
the audible signal ceases.
Changing or cancelling the cooking time
Touch the symbol
0
2 and then select the hotplate.
Change the cooking time or set to
‹‹
in the settings
range.
Notes
■
You can set a cooking time of up to 99 minutes.
■
If the cooking time has counted down to the last
minute, the timer display changes from minutes to
seconds.
Automatic timer
You can use this function to preselect a cooking time
for all hotplates. Each time a hotplate is switched on,
the pre-selected cooking time then counts down. When
the cooking time has elapsed, the hotplate switches off
automatically.
You can find out how to switch on the automatic timer in
the Basic settings section.
Note:
You can change the cooking time for a hotplate
or switch off the automatic timer for the hotplates:
Touch the symbol
0
2 and then select the hotplate.
Change the cooking time or set to
‹‹
in the settings
range.
Kitchen timer
You can use the kitchen timer to set a time of up to 99
minutes. It runs independently of all the other settings.
To activate it the hob must be on.
Setting the kitchen timer
1.
Touch the
0
symbol, the
V
display lights up.
‹‹
min
lights up in the timer display.
2.
Set the desired time in the settings range.
The timer starts counting down after a few seconds.
When the time has elapsed,
When the time has elapsed, you will hear an audible
signal and
‹‹
lights up in the display for 10 seconds.
The indicator
V
flashes. Touch any symbol. The
displays go out and the audible signal ceases.
Setting the correct time
Use the
0
symbol to select the kitchen timer and reset
the time.
Stopwatch function
The stopwatch function displays the time that has
passed since activating the function.
The stopwatch function only works when the hob is
switched on. When the hob is switched off, the
stopwatch function is switched off as well.
The stopwatch function is switched on by touching the
þ
symbol.
‹‹
appears in the timer display and timing
starts. Seconds are displayed during the first minute,
and then minutes.
The stopwatch function is switched off by touching the
þ
symbol again. The timer display goes out.
Note:
If another time-setting option is selected in
addition to the stopwatch function, the setting appears
in the timer display for 10 seconds. The stopwatch
function is then displayed again.
b
Automatic safety cut-out
Automatic safety cut-out
If a hotplate has been switched on for a long time
without the setting being changed, the automatic time
limit is activated.
The hotplate stops heating.
”‰
and the
•
/
œ
residual
heat indicator flash alternately on the hotplate display.
The display goes out when you touch any control. You
can make new settings.
When the time limit is activated depends on the heat
setting selected (1 to 10 hours).
z
Keep warm function
Keep warm function
The Keep warm function is suitable for melting
chocolate or butter and for warming food and cookware
Switching on the Keep warm function
1.
Touch the
è
symbol
2.
Select the hotplate.
–
lights up on the heat setting
display.
The Keep warm function is switched on.
Switching off the Keep warm function
1.
Touch the
è
symbol.
2.
Select the hotplate.
‹
lights up on the heat setting
display.
The Keep warm function is switched off.